light hammer taps

a few updates on some little things i've done around the house lately. been a little busy - 2 roommates now! had to make a whole new bedroom out of the space where i used to store boxes and defunct electronics.

this is an image heavy post so i will keep them all small and you can click the pic to enlarge if you want to.

one of my old how-to/hints books recommends storing your washers on a shower curtain hook. the plain kind, the ones i love and have ALL OVER THE HOUSE. 

 

well, i haven't gotten to the washers yet since mine are mostly already stored in a plastic compartmentalized caddy. but i do have this set of cheap wrenchs that needed a home. sure i could hang them all on a long peg by their handles but then if i want a wrench in the back they all have to come off one at a time. this way i only have two things to move in or out of position and i can separate them - one hook is metric and the other is standard.

found this nifty sticky backed measuring tape on clearance at the craft store. it's perforated in one foot measurements.

i put a strip of it on the lip of a drawer in my kitchen island and i just keep finding myself measuring this one thing or that up against it.

more useful than expected

broom clips are back - i found 3 sizes at ace hardware

i love hooks. especially cup hooks. but my nerve damage makes it a pain to screw them in by hand. i finally got a hex shanked chuck adaptor for my little black and decker drill/driver and popped in a screw eye. it does NOT work to unscrew them because that just unscrews the chuck itself. but it's great for setting rows of hooks under the cabinet

having a new roommate made for some interesting acoustic challenges when we all work different shifts and watch tv/listen to music at different hours. the interior doors in my house are made of.... paper. yep, paper. with a little stryofoam thrown in for support. 

you can see this in cutaway where i was putting a cat door in my roommate's door

so while we had the door off and the tools out, i filled her door with "Great Stuff" expanding foam. specifically the big gap filler variety. some in the bottom around the cat door and then, since there are assorted partitions in the door, i drilled two holes in the top that were the diameter of the fill tube on the can of great stuff and filled the top too. took about 2 cans.

 

although, if you have previously added a hook to a door, say, using a wall anchor [wet towels are heavy] you may want to seal off around the hook with some silicone or at least masking tape first. the foam found the gap around the screws and expanded right out of the door. it mostly wiped off, but this was a mess because i didn't do it right